Newest Post
// On :Monday, October 31, 2016
konfigurasi router 1
Router>en
Router#conf t
Enter configuration commands, one
per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 10.10.10.1
255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/0, changed state to up
Router(config-if)#int fa0/1
Router(config-if)#ip add 30.30.30.1
255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/1, changed state to up
Router(config-if)#ex
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/0, changed state to up
Router(config)#router ospf 1
Router(config-router)#network
10.10.10.0 0.0.0.3 area 10
Router(config-router)#network
30.30.30.0 0.0.0.255 area 10
Router(config-router)#do wr
Building configuration...
[OK]
Router(config-router)#
01:03:51:
%OSPF-5-ADJCHG: Process 1, Nbr 40.40.40.1 on FastEthernet0/0 from LOADING to
FULL, Loading Do
Router>en
Router#conf t
Enter configuration commands, one
per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 10.10.10.2
255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/0, changed state to up
Router(config-if)#int fa0/1
Router(config-if)#ip add 20.20.20.1
255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/1, changed state to up
Router(config-if)#int fa1/0
Router(config-if)#ip add 40.40.40.1
255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet1/0, changed state to up
Router(config-if)#ex
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/1, changed state to up
Router(config)#router ospf 1
Router(config-router)#network
10.10.10.0 0.0.0.3 area 10
Router(config-router)#network
20.20.20.0 0.0.0.3 area 20
Router(config-router)#network
40.40.40.0 0.0.0.255 area 0
Router(config-router)#do wr
Building configuration...
[OK]
Router(config-router)#
00:52:53:
%OSPF-5-ADJCHG: Process 1, Nbr 50.50.50.1 on FastEthernet0/1 from LOADING to
FULL, Loading Done
konfigurasi router 3:
Router>en
Router#conf t
Enter configuration commands, one
per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 20.20.20.2
255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/0, changed state to up
Router(config-if)#int fa0/1
Router(config-if)#ip add 50.50.50.1
255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface
FastEthernet0/1, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol
on Interface FastEthernet0/1, changed state to up
Router(config-if)#ex
Router(config)#router ospf 1
Router(config-router)#network
20.20.20.0 0.0.0.3 area 20
Router(config-router)#network
20.20.50.0 0.0.0.255 area 20
01:05:42: %OSPF-5-ADJCHG: Process
1, Nbr 40.40.40.1 on FastEthernet0/0 from LOADING to FULL, Loading Done
Router(config-router)#network
50.50.50.0 0.0.0.255 area 2
Router(config-router)#do wr
Building configuration...
[OK]
Router(config-router)#ex
Router(config)#router ospf 1
Router(config-router)#network
20.20.20.0 0.0.0.3 area 20
Router(config-router)#network
50.50.50.0 0.0.0.255 area 20
Router(config-router)#
01:11:32: %OSPF-6-AREACHG:
50.50.50.0/0 changed from area 2 to area 20
Router(config-router)#do wr
Building configuration...
[OK]
hasil ping:
