Newest Post
// On :Monday, October 10, 2016
1.
Pertama-tama
siapkan 6 buah router dan sambungkan kabel ke arah router
2.
Konfigurasi
masing masing router tersebut dengan cara:
3.
Router
0 pertama:
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with
CNTL/Z.
Router(config)#int se2/0
Router(config-if)#ip add 10.10.10.1 255.255.255.0
Router(config-if)#no sh
%LINK-5-CHANGED: Interface Serial2/0, changed state to
down
Router(config-if)#exit
Enable
Configure terminal
ip route 50.50.50.0 255.255.255.0 10.10.10.2
ip route 40.40.40.0 255.255.255.0 10.10.10.2
ip route 30.30.30.0 255.255.255.0 10.10.10.2
ip route 20.20.20.0 255.255.255.0 10.10.10.2
do wr
4. Lanjut konfigurasi router 1 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with
CNTL/Z.
Router(config)#int se2/0
Router(config-if)#ip add 10.10.10.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to
up
Router(config-if)#exit
Router(config)#int se
%LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial2/0, changed stateto up
3/0
Router(config-if)#ip add 20.20.20.1 255.255.255.0
Router(config-if)#no sh
%LINK-5-CHANGED: Interface Serial3/0, changed state to
down
Router(config-if)#exit
Router(config)#do wr
Building configuration...
[OK]
Enable
Configure terminal
ip route 50.50.50.0 255.255.255.0 20.20.20.2
ip route 40.40.50.0 255.255.255.0 20.20.20.2
ip route 30.30.50.0 255.255.255.0 20.20.20.2
do wr
5.
Lanjut
konfigurasi ke router 2 :
Router>enable
Router#configure terminal
Enter
configuration commands, one per line. End with CNTL/Z.
Router(config)#int
se2/0
Router(config-if)#ip
add 20.20.20.2 255.255.255.0
Router(config-if)#no
sh
Router(config-if)#
%LINK-5-CHANGED:
Interface Serial2/0, changed state to up
Router(config-if)#exit
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial2/0, changed state to up
Router(config)#int
se3/0
Router(config-if)#ip
add 30.30.30.1 255.255.255.0
Router(config-if)#no
sh
%LINK-5-CHANGED:
Interface Serial3/0, changed state to down
Router(config-if)#exit
Router(config)#do
wr
Building
configuration...
[OK]
Enable
Configure
terminal
ip
route 50.50.50.0 255.255.255.0 30.30.30.2
ip
route 40.40.40.0 255.255.255.0 30.30.30.2
ip
route 10.10.10.0 255.255.255.0 20.20.20.1
do
wr
6.
Lanjut
konfigurasi ke router 3 :
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with
CNTL/Z.
Router(config)#int se2/0
Router(config-if)#ip add 30.30.30.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to
up
Router(config-if)#exit
Router(config)#int se3/0
Router(config-if)#int se3/0
%LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial2/0, changed sta
Router(config-if)#ip add 40.40.40.1 255.255.255.0
Router(config-if)#no sh
%LINK-5-CHANGED: Interface Serial3/0, changed state to
down
Router(config-if)#exit
Router(config)#do wr
Building configuration...
[OK]
Enable
Configure
terminal
ip
route 50.50.50.0 255.255.255.0 40.40.40.2
ip
route 10.10.10.0 255.255.255.0 40.40.40.1
ip
route 20.20.20.0 255.255.255.0 40.40.40.1
do
wr
7.
Lanjut
konfigurasi router 4 :
Router#configure terminal
Enter configuration commands, one per line. End with
CNTL/Z.
Router(config)#int se2/0
Router(config-if)#ip add 40.40.40.2 255.255.255.0
% 40.40.40.0 overlaps with Serial3/0
Router(config-if)#no sh
Router(config-if)#exit
Router(config)#int se3/0
Router(config-if)#ip add 50.50.50.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#exit
Router(config)#do wr
Building configuration...
[OK]
Enable
Configure
terminal
IP
ROUTE 10.10.10.0 255.255.255.0 40.40.40.1
IP
ROUTE 20.20.20.0 255.255.255.0 40.40.40.1
IP
ROUTE 30.30.30.0 255.255.255.0 40.40.40.1
Do
wr
8.
Lanjut
konfigurasi router terakhir yaitu router 5 :
Router>enable
Router#configure
terminal
Enter configuration commands, one per line. End with
CNTL/Z.
Router(config)#int se2/0
Router(config-if)#ip add 50.50.50.2 255.255.255.0
Router(config-if)#no sh
Router(config-if)#
%LINK-5-CHANGED: Interface Serial2/0, changed state to
up
Router(config-if)#exit
Router(config)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface
Serial2/0, changed state to up
Router(config)#do wr
Building configuration...
[OK]
Enable
Configure
terminal
IP ROUTE
10.10.10.0 255.255.255.0 50.50.50.1
IP ROUTE
20.20.20.0 255.255.255.0 50.50.50.1
IP ROUTE
30.30.30.0 255.255.255.0 50.50.50.1
IP ROUTE
40.40.40.0 255.255.255.0 50.50.50.1
Do wr
9.
Dan
langkah terakhir yaitu ping dari router 0 ke router 5, pasti kan replay tanda
seru (!!!!).
1.
Konfigurasi
6 router selesai
terima kasih postingannya membantu :)
ReplyDelete