Newest Post

Routing RIP Ver 2

// On :Wednesday, October 26, 2016









ROUTER 8
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/0
Router(config-if)#ip add 30.30.30.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Router(config-if)#ex
Router(config)#int fa0/1
Router(config-if)#ip add 10.10.10.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

Router(config-if)#int fa1/0
Router(config-if)#ip add 70.70.70.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

Router(config-if)#int fa1/1
Router(config-if)#ip add 192.168.1.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
Router(config)#
Lanjut
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-if)#ver 2
Router(config-if)#network 30.30.30.0
Router(config-if)#network 10.10.10.0
Router(config-if)#network 70.70.70.0
Router(config-if)#network 192.168.1.0
Router(config-if)#ex




ROUTER 12
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 10.10.10.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#ex
Router(config)#int fa0/0
Router(config-if)#ip add 20.20.20.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Lanjut
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-if)#ver 2
Router(config-if)#network 10.10.10.0
Router(config-if)#network 20.20.20.0
Router(config-if)#ex



ROUTER 11
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 20.20.20.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up
Router(config-if)#int fa0/0
Router(config-if)#ip add 60.60.60.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
Router(config-if)#int fa1/0
Router(config-if)#ip add 90.90.90.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
Router(config-if)#int fa1/1
Router(config-if)#ip add 192.168.2.1 255.255.255.0
Router(config-if)#no sh
Router(config-if)#ex
Lanjut
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-if)#ver 2
Router(config-if)#network 20.20.20.0
Router(config-if)#network 60.60.60.0
Router(config-if)#network 90.90.90.0
Router(config-if)#network 192.168.2.0
Router(config-if)#ex



ROUTER 9
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 30.30.30.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#ex
Router(config)#int fa0/0
Router(config-if)#ip add 40.40.40.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Lanjut
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-if)#ver 2
Router(config-if)#network 30.30.30.0
Router(config-if)#network 40.40.40.0
Router(config-if)#ex



ROUTER 13
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 40.40.40.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#ex
Router(config)#int fa0/0
Router(config-if)#ip add 50.50.50.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Lanjut
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-if)#ver 2
Router(config-if)#network 40.40.40.0
Router(config-if)#network 50.50.50.0
Router(config-if)#ex

Router 10
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 50.50.50.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#ex
Router(config)#int fa0/0
Router(config-if)#ip add 60.60.60.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Lanjut
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-if)#ver 2
Router(config-if)#network 50.50.50.0
Router(config-if)#network 60.60.60.0
Router(config-if)#ex



ROUTER 14
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 70.70.70.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#ex
Router(config)#int fa0/0
Router(config-if)#ip add 80.80.80.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Lanjut
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-if)#ver 2
Router(config-if)#network 70.70.70.0
Router(config-if)#network 80.80.80.0
Router(config-if)#ex

ROUTER 15
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#int fa0/1
Router(config-if)#ip add 80.80.80.2 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/1, changed state to up

Router(config-if)#ex
Router(config)#int fa0/0
Router(config-if)#ip add 90.90.90.1 255.255.255.0
Router(config-if)#no sh

Router(config-if)#
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

Lanjut
Router>en
Router#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#router rip
Router(config-if)#ver 2
Router(config-if)#network 80.80.80.0
Router(config-if)#network 90.90.90.0
Router(config-if)#ex


Memberikan ip address pada pc
PC0 : 192.168.1.2
PC1: 192.168.2.2
Dan ping jika reply: konfigurasi routin rip ver 2 telah selesai

terima kasih semoga bermanfaat :)

Leave a Reply

Subscribe to Posts | Subscribe to Comments

Beberapa faktor kunci pengendali dan pengukuran kriteria e-commerce

Kunci Pengedali dan Pengukuran Kriteria e-commerce jika dilihat dari faktor: •Faktor Teknologi •Faktor Politik •Faktor Sosial •Faktor E...

// Copyright © Ilmu Informatika //Anime-Note//Powered by Blogger // Designed by Johanes Djogan //